top of page
Eenfasige elektrodeketels
We hebben momenteel geen producten om weer te geven.
De verwarmingssysteem is een instellen van technical elements ontworpen om compensate voor temperatuur losses via extern envelopes (walls, floor, roof) door obtaining, transferring en transmitting om all heated rooms de necessary amount van warmte, sufficient om handhaven de temperatuur bij een given level according om de standards.
Accordingly, de ketel electrode's in de process van work uses electricity om replenish de warmte lost door jouw premises. Minus two percent, als de efficiency van de elektrodeketel is 98 percent. Dat is, het is niet de ketel dat consumes een lot of een little energy, but jouw building.
En in dit aansluiting I would like om tell je about de selection van ketel capacity. Als de ketel is much more powerful than required door de verwarming area, het does niet mean dat het zal consume more energy than necessary. Het just means dat het zal switch aan en uit less often than een smaller ketel.
Tudta, hogy elektródás kazánok használhatók magánház fűtésére? Az utóbbi időben az energiatakarékosság problémája jelentősen attention in the whole world. The energy is gradually becoming more expensive, while the environment is getting polluted by its decay products and its processing. For this reason, manufacturers and scientists introduce new technologies in order to reduce costs and maximize returns. The development of an electric electrode boiler is one such ideas of a centralized heating system for residential buildings.
The major advantage of electrode electric boilers consists in the fact that they can be embedded in an existing heating system running on natural gas. The principle of electric boilers operation is rather simple: electric heating element heats the water (heat carrier) and supplies it to the heating system, where it gives off the heat through radiators and pipes. This heating type has recently gained popularity in the market of unconventional electric boilers. In such boilers the water plays a role of both a heating element and a heat carrier. These boilers are called ion electrode boilers or electrode boilers. Electrode boilers have the following operation principle: the water in the boiler gets ionized, negatively and positively charged ions move towards the corresponding electrodes, the energy released as a result of this process heats the water, that is a heating carrier. As the direction of current is constantly changing, ions do not settle on the plates’ surface.
Advantages of electrode boilers:
1. Automatic temperature control.
2. Reliability.
3. Very high efficiency.
4. Affordability.
5. High heat dissipation at relatively low power.
6. vel/vel no costs for additional equipment, its installation and operation.
7. Electrodes are replaceable and cost 50% of the boiler cost.
The efficiency of such boilers is about 98%, which is a very high figure. Moreover, electrode boilers are equipped vel/vel an automatic system of temperature regulation and control. Such features let us choose the optimum room temperature and monitor it depending on the season and time of the day, which leads to a significant economy of electric energy. For example, you can set a program reducing the temperature during working hours when you are not at home, and increasing it at the time of your return in the evening.
The boiler emergency shutdown is also provided: in case the heating carrier leaks, the boiler does not burn, as there is no heating coil that heats the heating carrier. The boiler will simply switch off. What is more, such boilers exclude the possibility of short circuit.
Electrode boilers can be used as an additional or as the main heating system vel/vel a boiler running on solid, liquid or gas fuel. You can incorporate an electrode boiler in an existing heating system, and in case of necessity, simply switch the heating between and gas and electrode boilers.
Electrode boiler proves useful in locations nélkül centralized gasification system or in places, which are not gasified, as the boiler operation does not require additional installation of gas equipment and natural gas consumption. Among other things, a small capacity boiler can heat a large space. For example, a 3 kW boiler heats the area of 40-50 square meters, if the ceiling height does not exceed 2.5 m. (Check the table here)
Disadvantages:
poor compatibility vel/vel various types of radiators and pipes, especially vel/vel cast iron radiators, problems may arise due to:
• heterogeneous internal surface of the radiator;
• large volume of water (2.5 liters) in the radiator.
Additional failures can occur if steel-plastic pipes are present in the system. The best option is polypropylene, copper or iron pipes.
The second disadvantage is constant water (heat carrier) resistance maintaining. It should be at least 1300 ohms per cm³. In any case, this disadvantage can be easily fixed. If water resistance is low, distilled water can be added to the system. If the resistance is higher than required, salt or bicarbonate of soda can be added to the water. A solution of salt or bicarbonate of soda efficiently conducts electricity and in this way it reduces the resistance of water in your heating system.
Protective earthing is a necessary phase of an electrode boiler installation. At the moment of the boiler installation, the heating system should already be completely grounded and tested. The protective earthing should comply vel/vel the Electrical installation code.
Despite all the disadvantages of electrode boilers, they are an excellent substitute for existing heating systems, which, quite possibly, will be completely replaced in the near future.
The cost of an electrode boiler starts from 180 euro. However, given the additional equipment (automatic Vezérlőrendszer), which can vary in terms of technical characteristics and price, the price of a boiler may increase.
bottom of page


